DTF Gang Sheet 56cm x 100 CM — Build Your Own
£10.99
Skip to product information
BEST VALUE
Order by 12:00 Monday to Friday for same-day dispatch
UK delivery in 1–5 working days
DTF Gang Sheet 56cm x 100 CM — Build Your Own
£10.99
From £8.99 per metre with volume pricing
One sheet, as many designs as you can fit. Mix logos, names and full prints on 56 cm wide film, pay per metre, and we print, powder and dispatch it the same day when you order by 12pm.
How to order
- Got a print-ready sheet? Click Upload your print-ready file. Or click Build your gang sheet to lay out your designs online.
- Add and arrange your designs on the 56 cm wide sheet. Make it as long as you need.
- Check your artwork, add the sheet to your cart and check out. Volume pricing is applied automatically.
Artwork not print-ready? Upload it as it is, then add free background removal or artwork setup to your basket and we will prepare it for you.
Build your own DTF gang sheet on 560mm wide film. Upload your designs, arrange and resize them in our online builder, and we print, powder and cure every sheet in-house in the UK. Choose how many metres you need: the more you order, the less you pay per metre. Order by 12pm for same-day dispatch, and get free UK delivery on orders over £40.
Who it's for
- Print shops and garment decorators: gang a whole job onto one sheet and press it in-house.
- Clothing brands and streetwear labels: front, back, sleeve and neck-label prints for a full drop in one order.
- Workwear and promo companies: lots of logo sizes and colourways for staff uniforms and events.
- Teams, schools and clubs: every name and number for a squad or year group on one sheet.
- Etsy sellers and crafters: stock up on your best-selling designs at the lowest cost per print.
Specifications
- Sheet width: 56 cm, priced per metre
- Artwork: 300 dpi with a transparent background
- File types: PNG, PDF, SVG, AI, EPS or JPG
- Do not mirror your artwork, we handle that
- Printed, powdered and cured in-house in the UK
- Order by 12pm for same-day dispatch
How to apply
- Cotton & poly-cotton 155–160°C · 12–15 sec
- Polyester, nylon & stretch 130–135°C · 8–10 sec
- Pressure Firm and even
- Finishing press 5–8 sec, covered
Step by step
- Pre-press the garment for 3–5 seconds to remove moisture and creases.
- Position the transfer printed side down on the fabric, so the design reads the right way round through the film.
- Press using the settings above for your fabric.
- Let it cool, then peel (cold peel): wait until the transfer is completely cool to the touch, about 30–60 seconds. Then peel the film slowly from one corner, keeping it low and close to the fabric. If any part starts to lift, lay the film back down, press for 5 more seconds and let it cool again before peeling.
- Finish the print: cover it with a Teflon sheet or baking paper and press again for 5–8 seconds. This seals the edges and helps the print last.
Tips for the best result
- Keep seams, zips and pockets out from under the press so the pressure stays even.
- Wait 24 hours before the first wash, then wash inside out at up to 40°C.
- Never iron directly on the print.
Every heat press is a little different, so a quick first press helps you dial in the settings for yours.